TG15PT ~ fits inside a metallic or non-metallic 1-1/2″ pipe

TG22P 2” Trap Guard to Fit Inside a 2” PVC Pipe – To make a watertight seal, use an adhesive-type caulk around the bottom of the top flange and them insert the retrofit Trap Guard into the 2’ pipe.

TG22IP 2” Trap Guard to fit inside a 2” cast iron pipe – To make a watertight seal, use an adhesive-type caulk around the bottom of the top flange and them insert the retrofit Trap Guard into the 2’ pipe.

TG3H 3” Trap Guard to fit inside a 3” Hub Drain – The Trap Guard is pressed to fit into the tailpiece of the drain.

TG34TP 3” Trap Guard to fit inside 4″ hub and most 4” strainer tailpieces – Use an adhesive-type caulk arounf the bottom of the flange to make a watertight seal.

TG34IP 3” Trap Guard to fit inside a 4” PVC or C.I. pipe – The Trap Guard comes with a PVC insert with an adjustable diameter. An O-Ring can be placed in different grooves in the insert to vary the diameter. The bottom groove is for an inside diameter of 4.09” and the top groove for an inside diameter of 3.84”.

TG34G 3” Trap Guard to fit through a 4” gasket to inside pipe – To make a watertight seal, use an adhesive-type caulk around the bottom of the top flange and then insert the retrofit Trap Guard into the 4” gasket.

TG33G 3” Trap Guard to fit through a 3” gasket to inside pipe – To make a watertight seal, use an adhesive-type caulk around the bottom of the top flange and then insert the retrofit Trap Guard into the 3” gasket.

TG33IP 3” Trap Guard to fit inside a 3” PVC or C.I. pipe – To make a watertight seal, use an adhesive-type caulk around the bottom of the top flange and then insert the retrofit Trap Guard into the pipe.

TG22G 2” Trap Guard to fit through a 2” gasket to inside pipe – To make a watertight seal, use an adhesive-type caulk around the bottom of the top flange and then insert the retrofit Trap Guard into the 2” gasket.

TG34SC 3” Trap Guard to fit inside an 842-4 Sioux Chief tailpiece – The Trap Guard is pressed to fit into the tailpiece of the drain.

TG33SC 3” Trap Guard to fit into an 842-3 Sioux Chief tailpiece – To make a watertight seal, use an adhesive-type caulk around the bottom of the top flange and then insert the retrofit Trap Guard into the tailpiece.

TG22SC 2” Trap Guard to fit into an 842-2 Sioux Chief tailpiece – To make a watertight seal, use an adhesive-type caulk around the bottom of the top flange and then insert the retrofit Trap Guard into the tailpiece.

T45630-F-CI 4″ Ground floor/underground floor drain with Trap Guard, 5″ round adjustable strainer and mechanical hub joint for cast iron

T35630-F-CI 3″ Ground floor/underground floor drain with Trap Guard, 5″ round adjustable strainer and mechanical hub joint for cast iron